BTWCV - A-1104 PRIMER FOR PLASTISOL COATINGS

  • MSDS: BTWCV
  • Manufacturer: QCM COMPANY
  • Product Name: A-1104 PRIMER FOR PLASTISOL COATINGS
  • National Stock Number: 8030-01-041-1600
Product Identification

Product ID:A-1104 PRIMER FOR PLASTISOL COATINGS
MSDS Date:05/20/1994
FSC:8030
NIIN:01-041-1600
Kit Part:Y
MSDS Number: BTWCV

Responsible Party
QCM COMPANY
930 SOUTH CENTRAL AVENUE
KENT, WA 98032
US

Emergency Phone: 206-859-0933/800-424-9300 CHEMTREC

Info Phone: 206-859-0933

Preparer: ROY WHEELDON

Cage: 8L872

Contractor
Q C M CO
KENT, WA 98032-6105 US

Telephone: 253-859-0933, FAX 253-859-0935

Cage: 8L872

Ingredients

FINAL RQ 5000 LBS)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 61.8%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


FINAL RQ 100 LBS)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 20%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


5.78 LBS/GAL (692 GRAMS/LITER); VOC PER

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN, EYE, RESPIRATORY AND
GASTROINTESTINAL IRRITATION, POSSIBLY SEVERE. EXCESSIVE INHALATION
MAY PRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION.

First Aid

First Aid:EYE CONTACT: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER
FOR AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION. SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING. WASH THOROUGHLY WITH SOAP AND WATER.
INHALATION: SEEK IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE
VOMITING.

Fire Fighting

Flash Point Method:TCC
Flash Point:16.0F,-8.9C
Lower Limits:1.8
Upper Limits:19.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WITH
FULL FACEPIECE. COOL CONTAINERS IN VICINITY WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:KEEP ALL IGNITION SOURCES AWAY. GROUND
ALL CONTAINERS. VAPORS MAY TRAVEL TO SOURCE OF IGNITION AND CAUSE
FLASHBACK. FIRE CAUSES ACID SMOKE AND/OR FUMES.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SMALL SPILLS:
TAKE UP WITH ABSORBENT MATERIAL. LARGE SPILLS: DAM AND RECOVER.

Handling

Handling and Storage Precautions:AVOID HIGH TEMPERATURE AREA AND
IGNITION SOURCES. ALL HANDLING EQUIPMENT SHOULD BE GROUNDED AND
EXPLOSION PROOF. AVOID ALL PERSONAL CONTACT.
Other Precautions:WASH THOROUGHLY AFTER HANDLING.

Exposure Controls

Respiratory Protection:USE APPROVED SELF-CONTAINED BREATHING APPARATUS
IF NECESSARY.
Ventilation:LOCAL EXHAUST: NECESSARY. MECHANICAL (GENERAL): NECESSARY.
Protective Gloves:RUBBER OR NEOPRENE
Eye Protection:CHEMICAL SPALSH GOGGLES
Other Protective Equipment:SAFETY SHOWER. EYE WASH STATION.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:165F,74C
Vapor Pres:85 @ 20C
Vapor Density:2.4
Spec Gravity:0.86 (WATER=1)
Evaporation Rate & Reference:4.6 (BU AC=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR TO AMBER LIQUID, KETONE ODOR
Percent Volatiles by Volume:86

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:STRONG ACIDS OR OXIDIZERS, HIGH
TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
MISCELLANEOUS HYDROCARBON
Conditions to Avoid Polymerization:STRONG OXIDIZERS, ALL IGNITION
SOURCES.

Disposal

Waste Disposal Methods:ACCORDING TO STATE, FEDERAL, AND LOCAL
REGULATIONS. HAZARDOUS WASTE CODE: F005, D001, U159, FLAMMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.